![]() ![]() I picked up another 2 gallon jug at TSC late last week (same brand) and put half that in it. I only had about 1.5 gal of it at home so I put that in and tested it and ironically the hitch raised and lowered fine at that point(no weight on it). Brand new (universal) hydraulic fluid in it. ![]() Just a few bubbles on the little dip stick now. It was foaming really bad over the winter. I'm getting a little bit of foam, but not terrible. If I disconnect the aux line (shut the loop off) the tractor drops RPM, so I think the pump is fine. The hitch stays in place if I stand on it, and again drops smoothly when I lower the hitch. When I drop the hitch, it floats down like it should. They drop quickly to the previous raised position, still up a few inches. With nothing on it, I can move the lift arms up freely by hand and they drop back down freely when I let go of them. Anyway, the 3PH only raises a few inches and it raises very slowly when it does. My understanding is that most of the hydraulic components on them are interchangeable. It's branded as a White Field boss 16 and is the equivalent to the TX2160 which is similar to several models that Iseki made for Bolens. This is a continuation of a problem that started shortly after I got it last fall and is likely the reason the previous owner sold it, but for $1200 I'm not complaining. ![]() I've got an Iseki tractor that's giving me fits. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
May 2023
Categories |